GM Service Manual Online
For 1990-2009 cars
Makes 🢒 Chevrolet 🢒 2004 🢒 Tahoe - 2WD 🢒 Engine 🢒 Engine Mechanical - 4.8L, 5.3L, and 6.0L 🢒 Valve Rocker Arm Cover Removal - Right Side

    Object Number: 260090 Size: SH

    Important: 

       • Do not remove the ignition coils from the valve rocker arm cover, unless required.
       • Do not remove the oil fill tube from the cover, unless service is required.
       • If the oil fill tube has been removed from the cover, install a NEW tube during assembly.

  1. Remove the ignition coil bracket studs from the rocker arm cover, if required.
  2. Remove the ignition coil and bracket assembly from the cover.

    3. Object Number: 260084 Size: SH
  3. Remove the valve rocker arm cover bolts.
  4. Remove the valve rocker arm cover.
  5. Remove and discard the valve rocker arm cover gasket, valve rocker arm cover grommets and valve rocker arm cover bolts if they are serviced with the grommet.

    6. Object Number: 1272820 Size: SH
  6. Remove the gasket (504) from the right cover.
  7. Discard the gasket.

    8. Object Number: 260110 Size: SH
  8. Remove the oil fill cap from the oil fill tube.
  9. Remove the oil fill tube, if required.
  10. Discard the oil fill tube.