For 1990-2009 cars
- Inspect the reaction carrier/support thrust bearing assembly (683) for wear or damage.
- Inspect the reaction gear support to case bearing (692) for wear or damage.
- Inspect the internal reaction gear (684) and the internal reaction gear support (685) for proper assembly, stripped splines, cracks, teeth, and lug damage.
- Check the reaction carrier pinion end play. The end play must not exceed 0.61 mm (0.024 in).
- Ensure that the pinions turn freely.
- Inspect the reaction carrier captive thrust bearing for wear or damage.
Note: Inspect all pinions, either 4 or 5 depending on model.
Inspect the reaction carrier for the following conditions:
| • | Pinion gear damage |
| • | Proper pinion staking |
| • | Excessive pinion washer wear |
| • | Keystoned pinion gears |
| 6.1. | Without touching the pinion gears, place a bushing or an output shaft sleeve (690) onto the bearing race, and turn it with the palm of your hand. |
| 6.2. | Any imperfections will be felt through the bushing. |