GM Service Manual Online
For 1990-2009 cars
Makes 🢒 Chevrolet 🢒 2004 🢒 Tahoe - 4WD 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T40-E/4T45-E 🢒 Torque Converter Installation

Tools Required

J 21366 Torque Converter Holding Strap


    Object Number: 20155 Size: SH
  1. Install a new turbine shaft O-ring (41) on the end of the turbine shaft.

    2. Caution: The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.

  2. Install the torque converter onto the transmission.
  3. Install the J 21366 .
  4. Remove the transmission from the holding fixture.