- Remove the parking pawl plate bolts.
- Remove the parking pawl plate.
 
- Remove the following components
from the transmission case:
| • | The parking pawl torsion spring | 
- Remove the parking pawl rod (1) from the manual shift shaft.
 
- Remove the manual lever
hub protection sleeve (1) from the manual detent lever hub (2) using
a hammer and a chisel.
 
- Remove the manual detent
lever hub roll pin using a standard drift punch and  a hammer.
- Remove the following components from the transmission case:
| • | The manual detent lever (1) | 
 
- Remove the manual shaft
oil seals (1) from both sides of the transmission  case (2) using a flathead
screwdriver.