Removal Procedure
- Remove the I/P cluster bezel. Refer to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
in Instrument Panel, Gages
 and Console.
 
- Insert a flat bladed tool between the Bezel
 assembly and the console.
- Pry the bezel from the console outwards partially in order to gain access
 to the connectors.
- Disconnect the electrical connectors.
- Remove the bezel from the console.
- Remove the CD player from the console
Installation Procedure
- Install the CD player to the console till the tabs locks in place.
 
- Place the bezel to the console.
- Connect the electrical connectors.
- Install the bezel to the console by pushing on the corners till the retainers
 clicks in place.
- Install the I/P cluster bezel. Refer to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
in Instrument Panel, Gages
 and Console.