For 1990-2009 cars
Front Seat Armrest Hinge Breaking (Replace Lid)
| Subject: | Front Seat Armrest Hinge Breaking (Replace Lid) |
| Models: | 2003-2006 Chevrolet Avalanche, Silverado, Suburban, Tahoe |
| 2003-2006 GMC Sierra, Yukon, Yukon XL |
| with Front Split Seat (RPO AE7) |
This bulletin is being revised to include RPO Code and interior trim color code information. Please discard Corporate Bulletin Number 06-08-50-004 (Section 08 -- Body and Accessories).
DO THIS | DON'T DO THIS |
|---|---|
Replace just the lid for the armrest. | Do NOT replace the armrest assembly. |
Condition
Some customers may comment that the lid for the armrest is broken.
Correction
Replace the armrest lid using the procedure below.
- Open the armrest lid.
- Remove the armrest inner panel. Use a flat-bladed screwdriver and place it between the two panels and pull to separate.
- Fold the seat backs to gain access to the hinge pin. Using a punch, push the hinge pin out.
- Install the two springs into the new armrest lid.
- Align the two springs and the lid to the armrest and install the pin.
- Install the inner lid to the armrest and close the lid.
- Place the seat back in the upright position.
Parts Information
Part Number | Description |
|---|---|
19127364 | Compartment Kit, F/Seat Stor (Dark Pewter) (69I) |
19127365 | Compartment Kit, F/Seat Stor (Pewter) (92I) |
19127366 | Compartment Kit, F/Seat Stor (Neutral) (52I) |
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
C2740 | Door And/Or Pad, Console Compartment - R&R Or Replace | Use Published Labor Operation Time |