GM Service Manual Online
For 1990-2009 cars
Makes 🢒 Chevrolet 🢒 2004 🢒 Tahoe - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 Parking and Turn Signal Lamp Replacement

Parking and Turn Signal Lamp Replacement Except Avalanche

Removal Procedure
  1. Ensure the headlamp switch is in the OFF position.

    2. Object Number: 348715 Size: SH
  2. Remove the headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement .
  3. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip.
  4. Disconnect the electrical connector from the park/turn signal lamp.

Installation Procedure

    Object Number: 348715 Size: SH
  1. Connect the electrical connector to the park/turn signal lamp.
  2. Install the lamp assembly.
  3. Install the headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement .

Parking and Turn Signal Lamp Replacement Avalanche


Object Number: 1595290 Size: SF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Retainer, Front Park and Turn Signal Lamp Assembly

Tip
Release the park/turn signal lamp retainer clip outboard from the radiator grille support reinforcement.

2

Tab, Front Park and Turn Signal Lamp Assembly

Tip
Release the tab by moving the lamp outward from the radiator grille support reinforcement.

3

Harness, Forward Lamp

Tip
Disconnect the electrical connectors.

4

Socket, Front Park and Turn Signal Lamp Assembly

Tip
Turn the lamp socket counterclockwise in order to remove the lamp socket from the park & turn signal lamp housing.

5

Lamp, Daytime Running, Front Side Marker, Park and Turn Signal