Air Inlet Valve Actuator Replacement Delphi

Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

1. Remove the air distribution duct. Refer to Air Distributor Duct Replacement .



2. Disconnect the electrical connection from the recirculation actuator (1).



3. Remove the recirculation actuator retaining screws.
4. Remove the recirculation actuator.

1. Install the recirculation actuator.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the recirculation actuator retaining screws.

Tighten
Tighten the screws to 1.6 N·m (14 lb in).




3. Connect the electrical connector to the recirculation actuator (1).
4. Install the air distribution duct. Refer to Air Distributor Duct Replacement .

Air Inlet Valve Actuator Replacement Visteon

Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement .



2. Remove the screws from the evaporator core cover (1).
3. Remove the evaporator core cover (1) from the HVAC module assembly (2).



4. Remove the screws from the recirculation actuator (1).
5. Remove the recirculation actuator (1) from the HVAC module assembly (2).

1. Install the recirculation actuator (1) to the HVAC module assembly (2).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the screws to the recirculation actuator (1).

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Install the evaporator core cover (1) to the HVAC module assembly (2).



4. Install the screws to the evaporator core cover (1).

Tighten
Tighten the screws to 2 N·m (18 lb in).

5. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
6. Reprogram the recirculation actuator. Refer to Actuator Recalibration .